DANH MỤC SẢN PHẨM

Máy phân tích công suất Hioki 3336-02 (2ch, D/A output)

Mã sản phẩm: 3336-02
Thương hiệu: HIOKI
Liên hệ
Xem kho còn hàng

Gọi đặt mua 0886.43.55.88 (7:30 - 22:00)

ĐẶC ĐIỂM NỔI BẬT

THÔNG SỐ KỸ THUẬT
- Loại dòng đo lường:
   + 1-phase 2-dây, 1-phase 3-dây
   + 3-phase 3-dây, 3phase 4-dây
   + 4 kênh đo điện áp, 4 kênh đo dòng điện
- Các nhóm đo lường:
   + Điện áp, dòng điện, công suất tiêu thị/phản kháng/biểu kiến
   + Công suất tiêu thụ/phản kháng tổng hợp
   + Hệ số công suất, tần số, dạng sóng hài
- Thang đo:
   + Điện áp: AC/DC 15 V đến 1000 V, 7 ranges
   + Dòng điện: AC/DC 200 mA đến 50 A, 8 ranges
   + Công suất: 3.0000 W đến 150.00 kW
- Độ chính xác( Công suất hữu công):
   + ±0.1% rdg. ±0.1% f.s. (DC)
   + ±0.1% rdg. ±0.05% f.s. (45 Hz đến 66 Hz, at Input < 50% f.s.)
   + ±0.15% rdg. (45 Hz to 66 Hz, đến 50% f.s. ≤ Input)
- Đầu ra D/A:
   + 16 channels, Level output DC ±2 V, Waveform output 1 V f.s
   + Level output, instantaneous waveform output(U,I,P)
   + Level output (apparent power, reactive power, power factor, or other)
   + High-speed active power level output
- Chức năng khác:
   + AC+DC, AC+DC Umn, AC, DC, FND
   + Tự động chuyển phạm vi đo, giá trị trung bình
   + Thiết lập tỷ lệ VT hoặc CT, kiểm soát sự đồng bộ
   + MAX/ MIN, và những tính năng khác
- Giao tiếp thiết bị bên ngoài:
   + RS-232C
   + LAN standard
- Nguồn: 100 to 240 V AC, 50/60 Hz, 40 VA max
- Khối lượng sản phẩm: 5.6 kg
- Kích thức sản phẩm: 305*132*256mm
- Phụ kiện đi kèm:
   + Hướng dẫn sử dụng ×1
   + Hướng dẫn đo ×1
   + Dây nguồn ×1
- Bảo hành: 12 tháng
Chi tiết

 

Measurement linesSingle-phase 2-wires, single-phase 3-wires, 3-phase 3-wires, (voltage / current measurement range set for each wiring mode)
Measurement itemsVoltage, Current, Active power, Apparent power, Reactive power, Power factor, Phase angle, Frequency, Efficiency, Current integration, Active power integration, Integrated time, Voltage waveform peak value, Current waveform peak value, Voltage crest factor, Current crest factor, Time average current, Time average active power, Voltage ripple factor, Current ripple factor
Harmonic parametersSynchronization frequency range: 10 Hz to 640 Hz, Analysis order up to 50th
Harmonic voltage RMS value, Harmonic current RMS value, Harmonic active power, Total harmonic voltage distortion, Total harmonic current distortion, Voltage fundamental waveform, Current fundamental waveform, Active power fundamental waveform, Apparent power fundamental waveform, Reactive power fundamental waveform, Power factor fundamental waveform (displacement power factor), Voltage current phase difference fundamental waveform, Interchannel voltage fundamental wave phase difference, Interchannel current fundamental wave phase difference, Harmonic voltage content % , Harmonic current content % , Harmonic active power content %
(The following parameters can be downloaded as data during PC communication but not displayed: Harmonic voltage phase angle, Harmonic current phase angle, Harmonic voltage current phase difference)
Measurement rangeVoltage range: AC/DC 15 V to 1000 V, 7 ranges
Current range: AC/DC 200 mA to 50 A, 8 ranges
Power range: 3.0000 W to 100.00 kW (Depends on combination of voltage and current range)
Integration measurement
(Integration time up to 10,000 hours)
[Current] No.of displayed digits: 6 digits (from 0.00000 mAh, Polarityindependent integration and Sum value)
[Active power] No.of displayed digits: 6 digits (from 0.00000 mWh, Polarity-independent integration and Sum value)
Input resistance (50/60 Hz)Voltage: 2 MΩ, Current: 1 mΩ or less (direct input)
Basic accuracy (Active power)±0.1% rdg. ±0.1% f.s. (DC)
±0.1% rdg. ±0.05% f.s. (45 Hz to 66 Hz, at Input < 50% f.s.)
±0.15% rdg. (45 Hz to 66 Hz, at 50% f.s. ≤ Input)
Display refresh rate5 times per second to 20 second (depend on average times settings)
Frequency characteristicsDC, 0.1 Hz to 100 kHz
D/A output (-02/-03 model only)16 channels (selectable from following items), Level output DC ±2 V, Waveform output 1 V f.s.
Level output, instantaneous waveform output (voltage, current, active power)
Level output (apparent power, reactive power, power factor, or other)
High-speed active power level output
Functions[Rectification method] AC+DC, AC+DC Umn, AC, DC, FND, Autorange, Average, VT or CT ratio settings, Synchronized control, MAX/ MIN, or other functions
InterfaceRS-232C / LAN standard, (-01/-03 model also includes GP-IB)
Power supply100 to 240 V AC, 50/60 Hz, 40 VA max.
Dimensions and mass305 mm (12.01 in) W × 132 mm (5.20 in) H × 256 mm (10.08 in) D, 5.2 kg (183.4 oz)
AccessoriesInstruction manual ×1, Measurement guide ×1, Power cord ×1

yzer Hioki 3336-02

 

SẢN PHẨM CÙNG PHÂN KHÚC GIÁ

SẢN PHẨM ĐÃ XEM